Svenska 
SLR2-2"NPT-BRZ/BRZ/P1, 2-25psi
Model SLR-2 is high performance, pressure loaded diaphragm-type, flow-to-open pressure reducing regulator. Design includes an internal pressure balancing pistoncylinder that provides high flow capacity and high pressure drop capability. Performance meets or exceeds that of competitive pressure loaded or pilot-operated designs. A non-relieving pressure regulator "loader" is bracket mounted to the top of the dome. The set point of the loader controls the upstream supply pressure into the dome to maintain the desired downstream pressure adjustable between 0,14 - 1,7 Barg (2-25 Psig) of the SLR-2. Pressure in the dome will constantly bleed out through a filter and check valve which is piped back into the outlet of the body of the pressure reducing regulator.
| Product Name | SLR2-2"NPT-BRZ/BRZ/P1, 2-25psi |
|---|---|
| Country of Manufacture | United States |
| Size [DN] | DN50 |
| Set pressure range [Bar] | 0,14-1.7 bar |
| Material Body | Carbon Steel ASTM 352 Gr. LCC |
| Connection | NPT |
| Model | SLR-2 |
| Valve Type | Pilot Operated Pressure Reducing Regulator |
| Service | Gas |
| Size [Inch] | 2" |
| Seat | Soft Seat |
| Seat Material | Polyurethane (PA) |
| Sealing Material | Buna-N (NBR) |
| Spring Chamber Material | Carbon Steel ASTM 352 Gr. LCC |
| Diaphragm Type | Composition |
| Diaphragm Material | Buna-N (NBR) |
| Trim Number | P1 |
| Trim Material | 17-4PH Stainless Steel |
| Max pressure | 102,1 Bar |
| Max Differential Pressure [Bar] | 41.3 |
| Max Temperature [°C] | +100 |
| Min Temperature [°C] | -40 |
| Leakage Class | ANSI /FCI 70-2 Class IV |
| Kvs [m3/h] | 51.7 |
| Cv [gpm] | 60.0 |
| Face to Face [mm] | 250 |
| Configuration | Pressure Loader |
| O2 Cleaned | No |
| Application | For air and similar gases |
| Certificate | On Request - ATEX II 2 G Ex h IIB T6...T1 Gb 1000ATEXR1 X |
| Process media | Corrosive gases, Combustible gases, Inert gases |
MODEL SLR-2 REV A PRESSURE REDUCING REGULATOR WITH NON-RELIEVING LOADER;
DN50 (2") LINE SIZE;
LCC STEEL BODY, LCC STEEL LOADING CHAMBER;
P1 17-4PH STAINLESS STEEL TRIM, 316L STAINLESS STEEL CAGE,
POLYURETHANE SEAT, NEOPRENE DIAPHRAGM, BUNA-N STATIC SEAL,
BUNA-N O-RING DYNAMIC SEAL;
NPT END CONNECTIONS;
LOWER SPRING 0.13 - 0.34 BARG RANGE;
INTERNAL SENSING;
LOADER CONFIGURATION: DN8 NPT, BRASS BODY AND SPRING CHAMBER, NON-RELIEVING,
STAINLESS STEEL TRIM, PTFE SEAT,
0.13 - 1.72 BARG (2 - 25 PSIG) SPRING RANGE;
BRASS FILTER, COPPER TUBING, BRASS FITTINGS
CODE: L29-BP17-131JB000A
| Length [mm] | 292 |
|---|---|
| Height [mm] | 362 |
| Width [mm] | 282 |
| Net Weight [kg] | 23.0 |
| Statistics code | 84811019 |
