KSC-25/1,3-1-PN40-AUQ80/230VAC

EUR 5,780
In stock
Article number
120-1-5073

The Ramén KSC control valve series is a brand-new innovative solution that offers the highest performance for controlling and isolating gases and fluids. With a broad range of flow capacities and flangeless (wafer) design, it is the most compact solution on the market in any installation. The KSC comes in two shapes, electrical or pneumatic with highest rangeability and lowest hysteresis in any configuration. Soft or metal seated designs makes it possible to optimize life cycle cost for any application.

Do you have questions? Contact us >>
Add product to comparison list >>
More Information
Product Name KSC-25/1,3-1-PN40-AUQ80/230VAC
Country of Manufacture Sweden
Model KSC Electric ON/OFF
Size [DN] DN25/1,3
Seat Soft Seat
Type of actuator Electric
Feedback Limit Switch
Size [Inch] 1"
Valve Type Ball Sector Valve
Seat material PTFE (Carbon/graphite reinforced)
Sealing FKM
Material body 1.4409
Trim Material 1.4409
Seat Holding Ring 1.4409
Trim no 1
Connection Wafer
Face to Face [mm] 50
Max pressure 40 Bar
Pressure Class [Bar] PN40
Max Temperature [°C] +200
Min Temperature [°C] -40
Leakage Class ANSI /FCI 70-2 Class VI
Kvs [m3/h] 1.1
Cv [gpm] 1.3
Characteristic Equal Percentage
Operation Method Electric Actuated
Actuator Model Auma Profox Q80
Positioner -
Limit Switch Yes
Input 24 VDC
Output Switch - max 250V AC 16A, 125V DC 0.6A
Supply 1-ph 100-240VAC, 50/60Hz
O2 Cleaned No
Application Clean and non-abrasive liquids/gases
Certificate CE marked, PED Cat II Mod D1,ISO-15848-1(Fugitive emission),VDI 2440(TA-luft),ATEX according to directive 2014/34/EU
Length [mm] 462
Height [mm] 315
Width [mm] 160
Net Weight [kg] 11.0
Statistics code 84818059
Applications Drinking water (potable water), Corrosive gases, Combustible gases, Inert gases

Ramén Ball Sector Valve type KS-1, DN25/1,3 PN40

Kvs/Cv = 1,1/1,3

Body: 1.4432 / Ball sector: 1.4435

Seat ring: PTFE (Carbon/graphite reinforced) (pos 10)

O-rings: FKM (pos 13/14/15/16)

Wafer type (for flange PN 10/40)

------

Electric actuator Auma Profox Q80, function On/Off S2-15min

Local controls with push buttons, control interface: 24VDC open-close

Status signals via output contacts open-closed-fault, analog output 4-20mA

Motor 1-ph 100-240VAC, 50/60Hz, integral actuator control, insulation class F

Torque 32-80 Nm, operating time 8-80 sec

Hand wheel, mechanical position indicator, enclosure protection IP67

Wiring diagram: TPCP00A1A1A100000

 

No typical applications has been added for this product.