KSC-25/0,03-1-PN40-WM8/DA-SRD998/HC-F-PA

EUR 4,610
In stock
Article number
120-1-5010

The Ramén KSC control valve series is a brand-new innovative solution that offers the highest performance for controlling and isolating gases and fluids. With a broad range of flow capacities and flangeless (wafer) design, it is the most compact solution on the market in any installation. The KSC comes in two shapes, electrical or pneumatic with highest rangeability and lowest hysteresis in any configuration. Soft or metal seated designs makes it possible to optimize life cycle cost for any application.

Do you have questions? Contact us >>
Add product to comparison list >>
More Information
Product Name KSC-25/0,03-1-PN40-WM8/DA-SRD998/HC-F-PA
Country of Manufacture Sweden
Model KSC Pneumatic Modulating
Size [DN] DN25/0,03
Seat Soft Seat
Type of actuator Double Acting (DA)
Feedback Without feedback
Size [Inch] 1"
Valve Type Ball Sector Valve
Seat material PTFE (Carbon/graphite reinforced)
Sealing FKM
Material body 1.4409
Trim Material 1.4409
Seat Holding Ring 1.4409
Trim no 1
Connection Wafer
Face to Face [mm] 50
Max pressure 40 Bar
Pressure Class [Bar] PN40
Max Temperature [°C] +200
Min Temperature [°C] -40
Leakage Class ANSI /FCI 70-2 Class VI
Kvs [m3/h] 0.025
Cv [gpm] 0.03
Characteristic Equal Percentage
Operation Method Pneumatic Actuated
Actuator Model WM8DA
Positioner Schneider Electric - SRD998
Accessories Filter Regulator w/Gauge
Limit Switch No
Input 4-20 mA
Output No
Supply 6 Bar
O2 Cleaned No
Application Clean and non-abrasive liquids/gases
Certificate CE marked, PED Cat II Mod D1,ISO-15848-1(Fugitive emission),VDI 2440(TA-luft),ATEX according to directive 2014/34/EU
Length [mm] 435
Height [mm] 105
Width [mm] 320
Net Weight [kg] 11.0
Statistics code 84818059
Applications Drinking water (potable water), Corrosive gases, Combustible gases, Inert gases

Ramén Ball Sector Valve type KS-1, DN25/0,03 PN40

Kvs/Cv = 0,025/0,03

Body: 1.4432 / Ball sector: 1.4435

Seat ring: PTFE (Carbon/graphite reinforced) (pos 10)

O-rings: FKM (pos 13/14/15/16)

Wafer type (for flange PN 10/40)

------

Double Acting pneumatic actuator WireMatic type WM8

------

Intelligent positioner Foxboro type SRD998 with HART communication (4-20 mA)

Double Acting, standard flow (Cv 0,2) – standard performance pneumatic (max 6 bar)

Fail Safe, pneumatic connection 1/4” NPT, electrical connection M20x1,5

ATEX / IEC Ex: II 2G Ex ia IIC T4/T6 Gb, II 1D Ex ia IIIB T100°C Da

------

Filter/Regulator type AW20-A, 1/4" NPT, set pressure 0,5-7 bar, including manometer

------

With plastic tubing and brass connections

 

No typical applications has been added for this product.