KSC-150-1-PN16-AUQ600/230VAC
The Model 3381 is an inexpensive, bronze pressure reducing regulator designed to handle small to mid capacity flow rates in general service. This unit is capable of controlling outlet pressure to a level between 2 and 200 psig (.34 and 13.8 Barg). Designed to control a wide range of fluids including industrial gases, air, oil, steam and water.
| Product Name | KSC-150-1-PN16-AUQ600/230VAC |
|---|---|
| Country of Manufacture | Sweden |
| Model | KSC Electric ON/OFF |
| Size [DN] | DN150 |
| Seat | Soft Seat |
| Type of actuator | Electric |
| Feedback | Limit Switch |
| Size [Inch] | 6" |
| Valve Type | Ball Sector Valve |
| Seat material | PTFE (Carbon/graphite reinforced) |
| Sealing | FKM |
| Material body | 1.4409 |
| Trim Material | 1.4409 |
| Seat Holding Ring | 1.4409 |
| Trim no | 1 |
| Connection | Wafer |
| Face to Face [mm] | 170 |
| Max pressure | 16 Bar |
| Pressure Class [Bar] | PN16 |
| Max Temperature [°C] | +200 |
| Min Temperature [°C] | -40 |
| Leakage Class | ANSI /FCI 70-2 Class VI |
| Kvs [m3/h] | 810 |
| Cv [gpm] | 950 |
| Characteristic | Equal Percentage |
| Operation Method | Electric Actuated |
| Actuator Model | Auma Profox Q600 |
| Positioner | - |
| Limit Switch | Yes |
| Input | 24 VDC |
| Output | Switch - max 250V AC 16A, 125V DC 0.6A |
| Supply | 1-ph 100-240VAC, 50/60Hz |
| O2 Cleaned | No |
| Application | Clean and non-abrasive liquids/gases |
| Certificate | CE marked, PED Cat II Mod D1,ISO-15848-1(Fugitive emission),VDI 2440(TA-luft),ATEX according to directive 2014/34/EU |
| Length [mm] | 778 |
| Height [mm] | 339 |
| Width [mm] | 220 |
| Net Weight [kg] | 36.0 |
| Statistics code | 84818059 |
| Applications | Drinking water (potable water), Corrosive gases, Combustible gases, Inert gases |
Ramén Ball Sector Valve type KS-1, DN150, PN16
Kvs/Cv = 810/950
Body: 1.4409 / Ball sector: 1.4409
Seat ring: PTFE (Carbon/graphite reinforced) (pos 10)
O-rings: FKM (pos 13/14/15/16)
Wafer type (for flange PN 10/16)
------
Electric actuator Auma Profox Q600, function On/Off S2-15min
Local controls with push buttons, control interface: 24VDC open-close
Status signals via output contacts open-closed-fault, analog output 4-20mA
Motor 1-ph 100-240VAC, 50/60Hz, integral actuator control, insulation class F
Torque 240-600 Nm, operating time 45-320 sec
Hand wheel, mechanical position indicator, enclosure protection IP67
Wiring diagram: TPCP00A1A1A100000
