Ramén spjällbackventil typ BAS302, DN300

EUR 4,310
In stock
Article number
EB302-1248-300

Ramén BAS check valve type 302 for liquid and gas flow. Designed for quick shut-off to prevent backflow and open at the smallest flowrates to maintain stable process conditions. Robust spring loaded, metal to metal design to withstand high temperature and harsh conditions. Still offering the highest possible leakage class and minimum maintenance. Ramén BAS check valves are available in stainless steel 316 and higher steel alloys for industrial applications. The correct material is selected based on the application and media, in order to provide the best corrosion resistance and the longest lifetime. Wafer type design for easy mounting between flanges in DN80 to DN600.

Typical applications are steam, district heating, cooling water, chemical, sea water, corrosive media, etc.

Do you have questions? Contact us >>
Add product to comparison list >>
More Information
Product Name Ramén spjällbackventil typ BAS302, DN300
Country of Manufacture Sweden
Size [DN] DN300
Material body 1.4408
Certificates CE-marked acc. to PED 2014/68/EU, PED cat III module B+D
Model BAS 302
Valve Type Spring Loaded Swing check valve
Size [Inch] 12"
Seat Metal Seat
Sealing PTFE
Seat material 1.4408
Trim Material 1.4408
Connection Wafer
Face to Face [mm] 78
Max pressure 40 Bar
Max Differential Pressure [Bar] 40
Pressure Class [Bar] PN10/40, ASME 150/300
Max Temperature [°C] +200
Min Temperature [°C] -50
Leakage Class Rate A acc. to EN12266-1
Kvs [m3/h] 5000
Cv [gpm] 5800
Limit Switch No
Output No
Counterweight No
Application Clean and slightly polluted gases/liquids, water, hot water, steam
Certificate CE-marked acc. to PED 2014/68/EU, Category III, Module B+D
Length [mm] 378
Height [mm] 78
Width [mm] 378
Net Weight [kg] 27.5
Statistics code 84813091
Applications Oil, Industrial wastewater, Food & beverage, Drinking water (potable water), Corrosive gases, Combustible gases, Inert gases, Chemicals

Design: Spring loaded, metal to metal seal

Nominal pressure: PN40

Connection: Wafer DIN PN 10/40, ANSI 150/300

Temperature range: -50°C to 200°C

Kv/Cv: 5000/5800

Material: Body and disc: EN 1.4408

Shaft and plugs: EN 1.4404

Spring: EN 1.4401

Plug seal: PTFE

Face to face: 78 mm

Weight: 27,5 kg

CE-marking according to PED 2014/68/EU, Category III, Module B+D

 

No typical applications has been added for this product.